How To Use The Fuel Pellet Machine?
Products Description
Fuel pellet machine is a kind of equipment used to compress biomass materials (such as wood chips, straw, etc.) into fuel pellets. This equipment is widely used in the field of biomass energy, providing strong support for environmental protection and efficient use of renewable resources.
Preparation before starting
Check whether the equipment is intact and whether all parts are connected tightly;
Clean the debris inside the equipment to ensure that no foreign matter remains;
Prepare the biomass material and perform necessary pretreatment (such as crushing, drying, etc.) to ensure that the material meets the feeding requirements of the pellet machine;
Check whether the power connection is stable and reliable to ensure that the equipment can be powered normally.
| Model No. | Capacity(kg/h) | Power(kw) | Weight(t) |
| RKL-250 | 100-200 | 15 | 0.5 |
| RKL-300 | 150-250 | 22 | 0.65 |
| RKL-350 | 100-300 | 30 | 0.76 |
| RKL-400 | 300-600 | 37 | 2.2 |
| RKL-450 | 500-800 | 55 | 4.3 |
| RKL-550 | 1000-1500 | 90 | 5.5 |
Specific operation steps
Start the equipment:According to the requirements of the equipment manual, turn on the main power supply, control system, etc. in sequence to ensure that the equipment is in normal working condition;
Adjust parameters: According to the properties of biomass materials and particle requirements, adjust the compression ratio, feeding speed and other parameters of the equipment;
Feeding operation: Evenly feed the pre-treated biomass materials into the feed port of the equipment, pay attention to controlling the feeding speed and amount to avoid equipment overload;
Observe the operation: During the operation of the equipment, closely observe the formation of the particles. If abnormalities are found (such as loose particles, unformed particles, etc.), adjust the parameters in time or stop the machine for inspection;
Collect particles: After the equipment has been running for a period of time, collect the compressed fuel particles from the discharge port, pay attention to the stacking and storage of the particles to avoid moisture or contamination.
Reason analysis: sitting for too long, heavy objects are pressed for a long time,pat the surface of the leather cloth with your hands and stretch on both sides
Reason analysis: sitting for too long, heavy objects are pressed for a long time,pat the surface of the leather cloth with your hands and stretch on both sides
If you have any questions about our equipment, please feel free to contact us.
