How To Use Different Sizes Of Wood Pellet Mill?

Wood pellet machines are prone to problems of varying sizes during use. At this time, a reasonable solution is needed. Before solving the problem of wood pellet machine, we need to understand the reasons for the different sizes of biomass fuel particles processed by different models of pellet machine manufacturers, so as to bring convenience to our use. What is the reason for the different sizes of wood pellet machines?

1. Feeder blade. Gears: The formation of biomass fuel pellets mainly relies on the rolling of the gears of the wood pellet machine and the cutting of the mold blades. A defective gear or die blade may cause uneven thickness and length of cut biomass fuel particles.
2. Motor: The motor equipped with the wood pellet machine is a motor suitable for its rated power. Once damaged or the operating power supply is unstable during operation, the wood pellet machine will be unable to granulate or the granulation will be uneven.
3. Wood pellet machine operation: The pellet machine manufacturer reminds that due to improper operation by operators, biomass fuel pellet processing machinery will also produce uneven particles. For example, the raw material contains a large amount of moisture, which prevents biomass fuel particles from forming and cold cracks may form. If this happens, the operator should analyze calmly, identify the cause, and make timely corrections to avoid affecting the output value of biomass fuel pellets processed by the wood pellet machine and causing corresponding economic losses.

Pellet machine manufacturers remind you that when feeding the wood pellet machine, you must pay attention to the different feeding sizes and the different feeding speeds, because different feeding sizes are not only easy to cause blockage of the wood pellet machine, but also easy to cause damage to the wood pellet machine. , thus affecting our normal work. This requires us to use and strengthen maintenance to extend the efficiency of the wood pellet machine.