How To Solve The Problem Of Fuel Pellet Machine?

                        The biomass fuel pellet machine generates radiation cracks from a source point when producing biomass pellets. The main reason for this situation is that the biomass fuel produced by the pellet machine manufacturer contains larger amounts of biomass fuel. Raw materials with the same degree of fiber are extruded and fused with each other during granulation, resulting in the presence of larger fibers, which affects the interaction between fibers. It is not as easy to soften as other fine raw materials, but when cooled, due to different degrees of softening, the amount of shrinkage is also different, causing radial cracks. The improved method is to properly control the thickness and uniformity of the powdered fuel raw materials, and add biomass raw materials with large sieve sizes through simple sieving powder before granulation.

                     The surface of the pellet material of the biomass fuel pellet machine is uneven. This situation is that the granulated powder contains uncrushed or semi-crushed large particle raw materials. Because the particles are relatively hard and relatively large, they cannot be well combined with other raw materials through the pellet machine die holes of the pellet machine manufacturer, making the particles appear uneven. The improved method is to properly control the thickness of the powder raw materials. Of course, the equipment will not be prone to problems. You can use it with confidence. Our equipment is very reliable.