How To Maintain Wood Pellet Mill?

                  Pellet mill production equipment maintenance should pay attention to the following matters: before using the pellet mill production equipment, first check whether the parts of the screws are tight. Before starting the machine, loosen the two adjusting screws on both ends of the pressure wheel, and then start the motor. Take 2.5 kg of Ao Pi, 12.5 kg of fine sand, 3 kg of oil mix well, first of all, the two pressure wheel adjusting screws tighten, and then start the machine, and then successively feed grinding, repeated grinding several times, to achieve the template holes smooth all the material out until.

                  After stopping the machine, the remaining material in the mould hole can be flushed away with steel nails. Pellet machine use, stop feeding before stopping, to be bin material processing is completed, plus soil oil-containing material pressed into the template hole, to maintain lubrication in the hole, in preparation for the next use will not occur blocking phenomenon. Pellet material length, can adjust the upper and lower position of the cutter above the outlet. The machine production of raw materials in the grass powder content shall not exceed 50%.