How To Maintain The Wood Pellet Mill Equipment?

               Pellet mill production equipment maintenance should pay attention to the following matters: before using the pellet mill production equipment, first check whether the screws of each part are tight. Before starting the machine, loosen the two adjusting screws on both ends of the pressure wheel, and then start the motor and observe whether the machine rotation is the same as the epitome.

              Take 2.5 kilograms of Ao Pi, 12.5 kilograms of fine sand, 3 kilograms of oil and mix it well, first tighten the two adjusting screws of the pressure wheel, and then start the machine, and then successively cast the material to grind, and repeatedly grind several times to achieve the template holes are smooth and all the material is discharged until. After stopping the machine, the remaining material in the mold hole can be flushed with steel nails. Pellet machine use, stop feeding before shutdown, to be bin material processing is completed, plus soil containing oil pressed into the template hole, keep the hole lubrication, for the next use will not occur clogging phenomenon.