Fuel Pellet Machine Precautions?

                   When the fuel pellet machine is in use, there must not be stones, iron, screws and other foreign objects in the raw materials. Once in the biomass pellet machine, it is easy to cause the machine to burst and damage the machine. During the granulation process, it is forbidden to idle the pressure wheel and grinding disk for a long time and add materials without interruption.

                   If the granulation is not granulated, check whether the mold is clogged, such as clogging. After opening hole by hole, put the abrasive into it. After repeated squeezing, granulate the raw material again. Regularly check the tightness of each screw, whether the biomass pellet mill, pressure roller bearings, spindle bearings are out of oil. If there is any strange noise during the operation of the biomass pellet machine, it should be stopped immediately, check whether there is any foreign matter, clean it up and then start the machine again.