Automatic Branch Shredder Operation Guide
Large automatic branch shredder is mainly used to deal with garden waste, such as branches, leaves, etc. In order to ensure that you can operate the equipment safely and correctly, this article provides a detailed operation guide.
Equipment inspection and preparation
1. Before use, please make sure that the appearance of the equipment is intact and there are no obvious signs of collision or damage.
2. Check whether the power cord and plug of the equipment are intact, without damage or looseness.
3. Check whether the blade of the equipment is sharp. If necessary, please replace it in time.
4. Clean the inside of the equipment to ensure that there is no debris or residue.
5. Add an appropriate amount of lubricating oil to the equipment to ensure smooth operation of the equipment.

| Model | MK06 | MK08 | MK06-18 | MK08-30 | MK08-40 |
| Drive System | PTO | PTO | Diesel Engine | Diesel Engine | Diesel Engine |
| (20-40HP) | (35-50HP) | (18HP) | (18HP) | (18HP) | |
| Max. Chipping Dia. | 6" | 8" | 6" | 8" | 8" |
| Chip Size | Thickness<6mm | ||||
| Rotation Angle of Outlet | 360 degree | ||||
| Mounting Type | 3-point hitch | Towable | |||
| Working Efficiency | 5-7m3/h | 8-15m3/h | 5-7m3/h | 8-12m3/h | 9-15m3/h |
| Weight (kg) | 340 | 450 | 600 | 700 | 850 |
Operation steps
1. Turn on the power switch and start the equipment. At this time, the equipment will start to preheat and wait for the preheating to be completed.
2. Put the branches to be processed into the feed port of the equipment, and pay attention that the length and diameter of the branches should be within the specified range of the equipment.
3. Adjust the crushing fineness of the equipment and select the appropriate fineness according to needs.
4. Press the start button and the device will start working. During the working process, please keep the device stable and avoid shaking or moving.
5. When the branches are crushed to the required fineness, turn off the device and take out the crushed materials.
6. After use, please turn off the power switch and clean up the residue inside and outside the device.

