What Does a sawdust log press Do
content
The core components of a corn stalk briquette making machine include a auger, forming sleeve, heating device, cutter, feeding device, and transmission system. These components work together to determine the machine's forming efficiency and finished product quality. Its maintenance logic is similar to that of a wood pellet machine (whose core components are pressure rollers, molds, and cutters), but with specific differences. The auger is the "core power component" of the briquette machine, responsible for pushing and extruding the raw material. Its surface is treated with a wear-resistant coating, but long-term use can lead to wear and deformation due to friction from the raw material, making it a key component to maintain. The forming sleeve, in conjunction with the auger, forms the extrusion chamber. The smoothness of its inner wall directly affects the surface quality of the finished product; it is prone to retaining and clumping raw material, requiring regular cleaning and polishing.
The heating unit is a critical component of the sawdust press machine, typically using electric heating coils or thermal oil heating devices. It softens the lignin in the raw material, and its operational stability determines the molding effect. Regular checks are necessary to ensure the heating elements are not damaged and the wiring is not aging, preventing temperature control malfunctions. The cutter cuts the extruded rod-shaped product to the set length, similar to the cutter in a wood pellet machine. Wear can easily lead to rough cuts and uneven lengths, requiring regular polishing or replacement. The transmission system, including the motor, reducer, and belts, follows the same maintenance logic as the wood pellet machine transmission system, requiring regular checks of lubrication and belt tension to ensure stable power transmission.
Daily maintenance of the briquette extruder machine should follow the principles of "regular cleaning, precise lubrication, and replacement as needed." After each production run, all residual raw materials inside the equipment must be thoroughly cleaned, especially the gaps between the forming cavity, auger shaft, and forming sleeve. Use specialized tools to remove any clumps of raw material to prevent hardening and increased wear on components. This is consistent with the requirements for cleaning the die holes after wood pellet mill production. Before starting the machine daily, check the accuracy of the heating device temperature and clean dust from the heating coil surface to ensure uniform heating. Every 200 hours of operation, inspect the auger shaft and forming sleeve. If the auger shaft is severely worn, replace it or apply a wear-resistant coating. If the inner wall of the forming sleeve is rough, sand it with fine sandpaper.
Regarding lubrication and maintenance, the auger shaft bearings and transmission system of the wood chip briquette press require regular application of high-temperature grease, replenishing every 100 hours of operation to prevent dry friction wear. For wood pellet mills, the focus is on lubricating the pressure roller bearings and die. The lubrication cycle is similar to that of the briquette machine, but the type of lubricant must be suitable for the equipment's operating conditions. In addition, the heating circuit of a wood shavings briquette maker needs to be inspected monthly to prevent short circuits or leakage, while wood pellet mills do not have a forced heating device and focus more on dust protection of the electrical system. Establishing a maintenance log to record the inspection and replacement time of parts, and adjusting the maintenance cycle according to the hardness of the raw materials (shortening the maintenance cycle by 20% when processing hardwood chips) can effectively extend the service life of the equipment.
Related equipment


about us
Customer visit

Certificate of Honor

FAQ
1.What is the price of equipment for the hydraulic biomass briquette press?
It costs approximately US$1,500.00 - 25,000.00
2. If equipments have some quality problem, how would you deal with?
We will responsible for all the quality problems. Change all the parts for free.

