RDF Briquetting Equipment Raw Materials: MSW Composition and Suitable Waste Fractions
Why RDF Briquetting Matters
The use of alternative fuels is one way to reduce carbon dioxide emissions and lower dependence on coal. Domestic waste briquetting machines and waste cloth briquetting machines are already used in large quantities for this purpose. RDF, which stands for refuse-derived fuel, is produced by sorting and compressing the combustible part of waste into uniform fuel briquettes that can be burned in industrial boilers and kilns.
The properties of RDF vary with region, living habits, and economic development levels, so the material composition differs from one city to another. What does not change is the principle: the combustible fraction of waste is recovered as fuel instead of being landfilled, and the resulting fuel rods substitute for coal in energy-intensive processes.
Typical Composition of RDF
For municipal solid waste in a typical urban area, the material composition of RDF is generally as follows:
| Waste Component | Share of RDF Composition |
|---|---|
| Paper | 68.10% |
| Plastic film | 15.00% |
| Hard plastic | 2.00% |
| Non-ferrous metals | 0.80% |
| Glass | 0.10% |
| Wood and rubber | 4.00% |
| Other substances | 10.10% |
Paper and plastic film together account for more than 80 percent of the composition, which is why the fuel value of RDF is high enough to support industrial combustion. The small metal and glass fractions are removed during sorting so they do not damage the briquetting equipment or the boilers.
Which Waste Fractions Support RDF Production
Urban mixed domestic waste contains three broad groups of materials. The first group is renewable resources such as beverage bottles, metals, and paper that can be recycled. The second group is perishable waste, mainly kitchen waste, which accounts for 40 to 60 percent of the total and can be utilized as biomass energy. The third group is high-calorific-value combustibles, which can be prepared into alternative fuels such as RDF and SRF to reduce the use of coal.
For RDF briquetting equipment, the suitable feed is the sorted combustible fraction: paper, plastic film, hard plastic, textiles, wood, and rubber. Kitchen waste and recyclable metals should be separated upstream, because high moisture in kitchen waste lowers the calorific value and metals damage the press tooling.
MK Series RDF Briquetting Equipment Parameters
The MK series of RDF briquetting machines covers production capacities from about 1 t/h up to 3 t/h with a uniform briquette profile.
| Model | Power | Capacity | Briquette Size | Hole Quantity |
|---|---|---|---|---|
| MK-550 | 55 kW | 1 t/h - 1.5 t/h | 32 x 32 mm | 36 pcs |
| MK-750 | 75 kW | 1.5 t/h - 2 t/h | 32 x 32 mm | 54 pcs |
| MK-900 | 90 kW | 2 t/h - 2.5 t/h | 32 x 32 mm | 72 pcs |
| MK-1600 | 160 kW | 2.5 t/h - 3 t/h | 32 x 32 mm | 120 pcs |
All models produce a 32 x 32 mm square briquette, so the main selection criterion is the hourly output required by the sorting plant or the fuel consumption of the downstream boiler.
Industries That Use RDF Fuel Rods
The RDF fuel rods produced by this equipment are mainly used in enterprises that operate industrial kilns and boilers that currently consume coal, oil, or gas as conventional energy. The typical end users include coal-fired power plants, thermal power plants, waste incineration power plants, cement plants, chemical plants, fertilizer plants, steel plants, paper mills, centralized heat and power cogeneration plants in industrial areas, large garment factories, non-ferrous metal processing plants, and pharmaceutical factories.
For these facilities, switching part of the fuel load to RDF rods reduces coal consumption, lowers carbon dioxide emissions, and provides a stable outlet for the combustible fraction of municipal waste.
Frequently Asked Questions
What is RDF made from?
RDF is made from the sorted combustible fraction of municipal solid waste, mainly paper, plastic film, hard plastic, textiles, wood, and rubber. In a typical composition, paper accounts for 68.10 percent and plastic film for 15 percent.
Can kitchen waste be used for RDF briquetting?
Kitchen waste accounts for 40 to 60 percent of municipal waste and can be utilized as biomass energy, but it is not suitable for RDF briquetting because its high moisture content lowers the calorific value of the fuel.
Why must metals and glass be removed before briquetting?
Metals and glass do not burn and can damage the briquetting press tooling and the boiler. In a typical waste stream they account for only 0.80 percent and 0.10 percent respectively and are removed during sorting.
What briquette size do the MK series machines produce?
All MK series models produce a 32 x 32 mm square briquette. The models differ in power, capacity, and hole quantity, from the MK-550 at 55 kW up to the MK-1600 at 160 kW.
Which industries can burn RDF fuel rods?
RDF fuel rods are used in coal-fired power plants, thermal power plants, waste incineration plants, cement plants, chemical plants, fertilizer plants, steel plants, paper mills, cogeneration plants, garment factories, non-ferrous metal processing plants, and pharmaceutical factories.
Does RDF production actually reduce carbon dioxide emissions?
Yes. Using alternative fuels such as RDF and SRF replaces part of the coal consumption in industrial kilns and boilers, which is one of the recognized ways to reduce carbon dioxide emissions.

