Notes on disassembly of biomass fuel pellet machine
Some issues that need to be paid attention to when disassembling and assembling the fuel pellet machine:
1. Generally, there is no need to remove the feed cover, you only need to open the observation window on the pelletizing chamber to check the working condition of the pressure wheel.
2. If you need to replace the pressure wheel or replace the mold, you need to remove the feed cover and the pressure wheel bin, unscrew the screws and nuts on it, and then unscrew the locking nut on the main shaft, lift the pressure wheel assembly with a lifting belt and move it out of the pressure wheel bin, and then screw two lifting screws to the process holes on the mold plate, lift it with a lifting belt, and then turn the other side of the mold over for use.
| Model | Capacity | Power | Dimensions |
| MK-250 | 100-200kg/h | 15kw | 1120*440*1060mm |
| MK-300 | 200-300kg/h | 22kw | 1280*560*1220mm |
| MK-350 | 300-400kg/h | 30kw | 1300*600*1250mm |
| MK-400 | 400-600kg/h | 37kw | 1390*650*1290mm |
| MK450 | 600-800kg/h | 45kw | 1620*700*1600mm |
3. If the roller skin or roller bearing needs to be replaced, remove the outer sealing cover on the roller, remove the round nut on the roller shaft, and then drive the roller bearing out from the inside out. After the bearing is removed, it needs to be replaced or not (cleaned with diesel), the inner hole of the roller should be kept clean, and then the roller assembly can be installed in reverse order.
Biomass fuel pellet machine is now more and more widely used due to its unique characteristics. When using the pellet machine, it is necessary to prevent some common problems from occurring, so that the pellet machine can work more efficiently and extend its service life.
