How to operate RDF molding equipment?

                  The moisture content of raw materials during the production process of fuel briquetting equipment must be controlled within 20%. If the moisture content is too high, the molding density will be low, so the feeding speed should be reduced and the residence time should be extended; when the raw material is too dry, water should be added appropriately for lubrication. During the production process, avoid frequent starts or overload operation. When there is a sudden power outage or overload, the machine should be stopped immediately, the raw materials in the machine warehouse should be cleaned, and it can only be started after everything is normal. Okay, now that we've explained the startup techniques, the shutdown techniques are also relatively simple. Let's briefly analyze them for you.

                 Prepare wet materials with a moisture content of about 50%. According to the discharge of bulk materials, the quantity will increase sharply from small to large until all the mold holes have discharged bulk materials. The machine can be stopped in sequence after stopping feeding. When shutting down, the machine must wait until the materials are completely unloaded before shutting down. It is not allowed to shut down when the machine is fully loaded. After shutdown, check and clean up remaining materials, and clean the equipment and surrounding environment. Finished materials should be moisture-proof and waterproof, and the storage area must be ventilated and dry. If you have any questions about the RDF molding machine, please feel free to consult us, we will be happy to answer your questions.