How to Fix Wood Chip Pellet maker Machine Suddenly Stopping Rotating ?
content
The first common mechanical fault in biomass sawdust pellet machines: Pressure roller jamming. This is often caused by hard impurities (nails, stones) in the raw materials entering the pressing chamber and getting stuck between the pressure roller and the die, preventing the roller from rotating. Troubleshooting: After turning off the power, open the equipment access door and observe the gap between the pressure roller and the die. If impurities are stuck, they will be visible. Solution: Use a wrench to rotate the pressure roller shaft and use a special tool to remove the impurities. If the impurities are tightly stuck, loosen the pressure roller adjusting bolt to increase the gap between the roller and the die before removing the impurities. After removal, check the surface of the pressure roller for scratches. Minor scratches can be repaired by grinding; severe scratches require replacement of the pressure roller.
The second common mechanical fault in small ring die wood pellet making machines: Bearing damage. Damage to the pressure roller bearing or motor bearing will cause a sudden increase in rotational resistance, eventually causing the equipment to stop. Troubleshooting: After turning off the power, manually rotate the pressure roller shaft and motor shaft. If rotation is difficult, there is a jamming sensation or abnormal noise, and the bearing area shows obvious heat and oil leakage, the bearing is damaged. Solutions: 1. Replace the damaged bearing with a high-temperature wear-resistant bearing (such as a deep groove ball bearing) that matches the equipment model. During replacement, clean the bearing housing of impurities and old grease, add new high-temperature grease, and ensure proper lubrication. After replacement, adjust the bearing clearance to avoid it being too loose or too tight.
2. The third common home use pellet mill/wood pelletizer malfunction: Gearbox failure. Weary gears, insufficient or deteriorated gear oil in the gearbox can cause gears to seize, resulting in equipment failure. Troubleshooting: Observe the gearbox for oil leaks. Open the gearbox filler cap and check the gear oil level and quality. If the oil level is too low, the oil is dark and contains impurities, or there is a "clicking" sound when rotating the motor shaft, the gearbox is faulty. Solutions: If the problem is with the gear oil, replace it with new gear oil (select the model according to the equipment manual) and clean the impurities from the gearbox. If the gears are worn and seized, contact a professional repairman to disassemble and repair the gearbox or replace the gears. Home users are not advised to disassemble it themselves.
Mechanical Failure Prevention Tips: Regularly inspect the mechanical parts of the small home use biomass wood pleat mill, and check the pressure roller bearing and gearbox oil level every 200 working hours; ensure thorough removal of impurities from raw materials, and establish a three-stage impurity removal system (screen + magnetic separation + manual sorting); avoid processing excessively hard raw materials to reduce wear and tear on mechanical parts.
Related equipment




about us
Customer visit

Certificate of Honor

FAQ
1.What is the price of equipment for the biofuel sawdust pellet machine?
It costs approximately US$1,500.00 - 25,000.00
2. If equipments have some quality problem, how would you deal with?
We will responsible for all the quality problems. Change all the parts for free.

