Knowledge

How does the wood chip pellet mill work?

              The raw material is melted and compacted in the barrel of the wood chip pellet machine, and flows through the porous filter plate runner and through the neck of the head into the head molding die. The mold core and the mold sleeve are properly matched to form an annular gap with decreasing cross-section, so that the raw material melt forms a continuous and dense tubular coating around the core line.
              In order to make the head of the raw material flow channel reasonable, accumulation of rubber dead ends, often set up diversion sleeve. For the raw material extrusion pressure fluctuations, also set up a pressure equalization ring. Biomass pellet machine manufacturer reminds: the head is also equipped with a mold correction and adjustment device, which is convenient for adjusting and correcting the concentricity of the die core and die sleeve. The function of the transmission system is to drive the screw and provide the torque and speed required by the screw in the extrusion process. It usually consists of a motor, reducer and bearings. 

sawdust pellet machine

You Might Also Like

Send Inquiry