Do you understand the production process of wood chip pellet machine?

                     Straw pellet machine production process record, check the temperature of granular material. Take granular material for durability test, check the powder content of the finished product. Check the gap of the crushing roller. Check whether the centrifugal dust collector return pipe and grading screen return pipe are blocked. The above work is carried out once every 4H. Record various production parameters, such as production time, material temperature, durability, powder content, production varieties, production tonnage and efficiency. Pay attention to the control panel, coordination of packaging and granulation, in order to return to the front and timely detection of various problems, timely treatment and reduce losses, such as timely inspection of the material in the powder content is not too high, whether there are small pieces of material, whether the material temperature is more than the standard and so on.

                    At the end of production, the order of shutdown is opposite to the order of start-up, and the related equipment is shut down from front to back according to the process flow. When the straw pellet mill bin low level indicator shows no material, open the manual feeding door of the straw pellet mill and observe the material flow in the feeding port. When the material flow is obviously reduced, let the cooler unload manually and increase the return material flow, in order to increase the material flow in the inlet of the straw pellet machine and ensure the quality of granulation. At this time, pay attention to whether the return pipe is blocked.