What To Do If The Fuel Pellet Machine Is Clogged?

                In order to adapt the fuel pellets to the competitive demands of the market, we must ensure its good quality. The conditioning of the material before pelletizing is important because it directly affects the output of the biomass pellet mill and the quality of the pellets, especially the water stability of the material. There must not be stones, iron, screws and other foreign objects in the raw materials. Once it enters the biomass pellet machine, it is easy to cause the machine to burst and damage the machine.

                In the process of pelletizing the fuel pellet machine, it is forbidden to idle the pressure wheel and grinding disk for a long time and add materials without interruption. If the granulation is not granulated, check whether the mold is clogged, such as clogging. After opening hole by hole, put the abrasive into it. After repeated squeezing, granulate the raw material again. Regularly check the tightness of each screw, whether the biomass pelletizer, pressure roller bearings, spindle bearings are out of oil.