What Are The Effects Of Too Fast Feeding On The Wood Pellet Machine?

           The technicians of the pellet machine manufacturers strictly require the new biomass corn stover fuel pellet machine current to be controlled according to the specified load, and do not allow long time overload production, which is the main reason for the damage of corn stover fuel pellet machine equipment.

           In the whole process, the new biomass corn stover fuel pellet mill can only give full play to its good production state when running near full load. The feeding speed should not be too fast. After about 10 minutes, the body starts to heat up, and then feed at normal speed, otherwise it will lead to clogging and high temperature. Check whether the biomass corn straw fuel pellet machine oiler is normal and whether the oil circuit is smooth before the corn straw fuel pellet machine is turned on to prevent the high temperature from burning the bearings and other accessories.