How To Adjust The Rice Husk Pellet Machine?

                   Adjust the pressure roller screw and adjust it evenly until the pressure roller can not be rotated by hand. Open the rice husk pellet mill and check the rotation of each press wheel again. If the press wheels do not touch the disk, adjust the screws again until the rollers touch the disk, then put the oil into the rice husk pelletizer one by one.

                   After normal discharge, increase the input and then repeat the operation. Grind for half an hour and put into normal production. Do not discard the abrasive, when it is expected to work for a long time without use, press the abrasive into the machine, so as not to clog the hole in the next use. Biomass pellet machine manufacturers suggest that during the processing of fuel pellets, raw materials should be mixed with water and stirred well before pelletizing. The proportion of raw materials is controlled at 50%. The feeding method can be manual, screw conveyor or belt conveyor.