Analysis Of Feeding Control Technology Of Biomass Fuel Machine

This method requires loading the biomass raw materials into the feeding port. After several tests, the workers manually control the feeding amount by constantly adjusting it to achieve the best feeding effect. In the actual production process, there are certain disadvantages in manually controlling the feeding size, such as low production efficiency and difficulty in achieving continuous production.
In order to solve the problem of manual control of the feeding size, the technology of automatic control of the feeding size has been developed. This technology automatically adjusts the biomass feeding through an electronic control system to ensure production efficiency and feeding accuracy. Automatic control of the feeding size can pre-set the feeding amount according to the characteristics of the biomass raw materials, and monitor and adjust the feeding amount through sensors, so as to achieve precise control of the feeding size.

Ways to control the feeding size
1. Adjust the feeding device
In order to control the feeding size of the biomass fuel machine, it can be controlled by adjusting the feeding device. The feeding device is generally divided into manual and automatic types. By adjusting the feeding device, the feeding speed and feeding amount of the biomass raw materials can be changed. It should be noted that when adjusting the feeding device, care should be taken not to change the original parameters.
2. Adjust the burner parameters
In addition to adjusting the feeding device, the feeding size can also be controlled by adjusting the parameters. These measures can affect the speed of the biomass fuel machine, thereby achieving the effect of controlling the feeding size.