What should I do if the temperature of the biomass pellet machine is too high?

When the barrel speed is too fast, the residence time of the material in the heater will be reduced, resulting in the material temperature failing to meet the design requirements, thereby affecting the particle forming effect and even causing the equipment to overheat.
Solution: Reduce the barrel speed and gradually adjust it to a suitable speed.
The transmission system inside the biomass pellet machine needs to be lubricated to reduce wear and friction and ensure the normal operation of the equipment. When the lubrication is poor, the friction increases, which can easily cause the equipment to overheat.

Solution: Regularly check whether the lubricating oil is sufficient, clean the transmission system, and add an appropriate amount of lubricating oil to increase the lubrication effect.
The biomass pellet machine generates a lot of heat during operation. In order to ensure the normal operation of the equipment, it is necessary to continuously inject cooling water to reduce the temperature of the equipment. When the cooling water flow is insufficient, the heat inside the equipment cannot be removed in time, resulting in overheating of the equipment.
Solution: Check whether the cooling water pump is normal, increase or adjust the cooling water flow to lower the equipment temperature.