Precautions For Pellet Mills
Farming industry, more and more farmers have purchased a feed pellet mill, deeply appreciate the benefits brought by the pellet mill, because it produces particles can be sterilised, but does not destroy the composition of the raw material, to avoid the animal picking, real savings in farming costs, for the long term use of the people who have found a way to operate a simple, convenient and fast; for those who have just begun to use the following aspects to pay attention to aspects.
I. Precautions when receiving electricity
1, when you receive the equipment, first check whether things are complete, hopper, outlet are all in, whether the motor is broken.
2, go home and connect the electricity, two-phase electricity (single-phase electricity or household lighting) models are 125, 150, 160, the power cord is not less than 4 square copper wire, to be connected to the air switch, can not be connected to the plug, plug directly into the plugboard operation, to avoid causing damage to the motor or the line on fire, because of the larger load of pellet machine (with a three-phase electricity can be equipped with 3-4 kilowatts). Must use three-phase electricity models 210, 230, 260, 300, 400, three electric power as power electricity, pellet machine performance is more stable, but also from the big power access to the air switch, and then access to the motor, wiring is completed, first check whether the motor steering is correct, if the steering is not correct, should be immediately shut down, two of the wires arbitrarily switched position can be.
Second, the use of the machine
1, first add gear oil, according to the instructions to add heavy-duty gear oil, labelled 85W-90 or 85W-140, add to the machine oil mirror position can be.
2, make grinding material, pellet machine for the first time, be sure to grind, the hole is more astringent, need oil lubrication a little, according to the ratio of 5:2 configuration of grinding material, bran, sawdust mixed with waste engine oil mixing evenly, placed aside first.
3, adjust the pressure wheel screws, first adjust the pressure wheel screws on the ear, to balance the adjustment, adjust to the pressure wheel to hand rotation can not move until; boot, check the rotation of each pressure wheel again, such as the pressure wheel rotation does not contact the disc, should again adjust the screws until the roller contact with the surface of the disc, and then a handful of oil into the machine, to be normal after the material, you can increase the amount of input, and then repeat the operation, grinding for half an hour! Can be put into normal production, grinding material do not discard, after the end of the work is not expected to be used for a longer period of time, the grinding material is pressed into the machine, to avoid the next use of the hole in the clogging.
4, in the process of feed processing, the raw materials should be mixed with water and stirred evenly after pelleting, if the grass is more, the moulding effect is not good, the proportion of concentrate feed will be increased, and the proportion of grass will be controlled at 50%. Feeding method can choose artificial, screw conveyor or belt conveyor.
5,After the processing is finished, loosen the screws of the pressure wheel to make the roller in a free state, and clean up the residual material after stopping the machine.
feed pellet machine 155
C. Precautions
1, the raw materials must not have stones, iron, screws and other foreign objects. Once inside the machine, it is easy to cause the machine to blow up and cause damage to the machine.
2, granulation is strictly prohibited for a long time pressure wheel and grinding disc idling, should be uninterrupted feeding.
3,When there is no grain when granulating, you should check whether the mould is clogged, such as clogging. After throwing open the hole by hole, put the grinding material into it, and then put the raw material into granulation again after repeated extrusion.
4, should always check the tightness of the screws, differential package, pressure wheel bearings, universal joints, spindle bearings, whether the lack of oil.
5,If there is any strange noise when the machine is working, it should be stopped immediately, check whether there is any foreign matter, and clean it up before restarting the machine.
