What are the precautions for Garbage briquetting machine?

1. Preparation work of Ring Mold Fuel Briquette Machine
1. Check whether all accessories of the scrap iron briquetting machine are in good condition, and replace or repair them in time if any problems are found.
2. Check whether the oil is sufficient. If it is insufficient, add it in time.
3. Check whether the power connection of the scrap iron briquetting machine is normal.
4. Place the scrap iron and sort it as needed.

2. Biofuel Briquette Machine startup operation
1. Turn on the power switch before turning on the machine. After the green indicator light turns on, press the start button.
2. Turn on the power of the rubber belt conveyor so that the scrap iron can be smoothly transported to the working area of the briquetting machine.
3. Set the pressure and select the appropriate extrusion die.
4. Start the briquetting operation, pay attention to observation during the operation, and adjust pressure, temperature and other parameters in time.

3. Precautions for operating Waste Fuel Briquetting Equipment
1. Before use, you should understand the basic principles and operating methods of the Ring Die Waste Paper Briquette Machine, and do not operate it without authorization.
2. During operation, please pay attention to safety and do not put your hands into the briquetting machine.
3. Clean up waste residue in time and keep the operating environment clean and tidy.
4. Regularly check the operating status of the briquetting machine. For equipment that has not been used for a long time, anti-corrosion and maintenance work must be done.
To sum up, the operating procedures of the Ring Die Wood Briquette Machine need to be carried out carefully and reasonably, and the operating procedures must be followed to ensure the safety and production efficiency of the equipment.