What should we pay attention to when using a biomass pellet machine?

The straw pellet machine is deeply loved by the majority of users. The problem of surplus straw in rural areas has been easily solved, and the fate of straw has changed, turning waste into treasure. But to produce high-quality pellet fuel, what do we need to pay attention to when using a straw pellet machine? Usually, straw contains a lot of water when it is first harvested, and it is easy to get moldy when piled together. So they need to be dried separately for a while. Pay attention to keep them ventilated and dry, and then store them uniformly. When purchasing straw raw materials, moldy straw should be rejected. Moreover, the straw pellet machine has high requirements for the moisture content of the straw. The success rate is high when the moisture content is around 17%, so water control must be done well.

After the straw raw materials are purchased, they are stacked upright and kept at a certain distance to further evaporate water. In order to meet the processing requirements of the straw pellet machine, it is often exposed to sunlight to prevent mildew. Before feeding, the straw pellet machine should be tested for a period of time to observe the operating status, check whether each component is normal, and deal with abnormal phenomena in a timely manner to ensure that the straw pellet machine operates normally and feeds evenly. The fuel pellet machine is one of our main products. You can purchase our products according to your needs. If you have any questions about the fuel pellet machine, you can call us at any time and we will serve you wholeheartedly.