How to do the maintenance of wood pellet mill?

               Straw pellet machine system process: check the cooler, pulverizer, elevator, return pipe, centrifugal separator, grading sieve, etc. Whether there is material accumulation, and then turn off the main power supply of the straw pellet machine system, do a good job of cleaning.

               Pellet machine manufacturers recommend daily maintenance of straw pellet machine: strictly in accordance with the provisions of the lubrication diagram to the lubrication points, and check the oil pump. Before shifting, check the distance between the cutter and the mold to make sure that it is not less than 3mm. check whether the bolts, screws and scrapers in the pressing chamber are loose before shift change. Before starting the machine, check the die bar gap and adjust it in time to make sure the gap of each die bar is consistent. Before shift change, check the iron removal device and clean the magnetic impurities and accumulated materials in time.